Freeze-It Freeze Spray

Freeze-It freeze spray is engineered for locating thermal intermittent electrical components and cooling printed circuit boards. This circuit refrigerant system is nonflammable, residue-free and provides fast cooling action.

CLICK HERE FOR FREEZE SPRAY SELECTION GUIDE

Features & Benefits

  • Pinpoint spray isolates individual components without freezing surrounding areas
  • Rapidly cools components to -60°F/-51°C
  • Non-abrasive, safe for use on plastics and other sensitive surfaces
  • Ultra pure, filtered to <0.2 microns
  • Nonflammable
  • CFC/HCFC free
  • Evaporates quickly
  • Leaves no residue

Applications

  • Cool Equipment for Testing
  • Dissipate Heat While Soldering or Desoldering
  • Isolate Thermal Intermittent Components
  • Test Circuit Traces for Continuity
  • Test Printed Circuit Boards for Stress Fractures
  • Track Intermittent Failures and Shorts
Specifications Fed Spec A-A58060, ARI Standard 700, App.C
Call-outs

Northern Telecom/BNR (ES1050) - 272012

United Airlines (ES1050, ES1550) - GAS3002-1SC

NSN ES1050 - 6850-01-333-1841
Shelf Life 10 yrs.
Shipping Name Consumer Commodity ORM-D

Swipe to View Add to Cart Button 

Part # Size Units Per Case
ES1050

10 oz. / 283 g aerosol

12 cans
ES1550

15 oz. / 425 g aerosol

12 cans
Order from an authorized distributor

FAQ's

Is there something I can do with the extension tube (straw) so it doesn’t get lost?

The red cap on Chemtronics aerosol products like flux removers, degreasers, and Freeze-It Freeze Spray has a notch on the top. That is engineered for the straw to snap in and hold into place so you don’t loose it. The aerosol trigger sprayers that are common on dusters, freeze sprays, and flux removers, have two ways to store the straw when not in use. The hole at the back of the body of the sprayer is just the right size for the straw to slide into place for storage. The slot below the trigger is also the right size for the straw to snap into place, which also has the advantage of locking the trigger.

How do I figure out the shelf life of a product?

The shelf life of a product can be found on either the technical data sheet (TDS), available on the product page, or by looking on the certificate on conformance (COC). The COC can be downloaded by going to https://www.chemtronics.com/coc. Once you have the shelf life, you will need to add it to the manufacture date for a use-by date. The manufacture date can be identified by the batch number. The batch code used on most of our products are manufacture dates in the Julian Date format. The format is YYDDD, where YY = year, DDD = day. For example, 19200 translates to the 200th day of 2019, or July 19, 2019. This webpage explains and provides charts to help interpret our batch numbers: https://www.chemtronics.com/batch-codes.

Articles

Ultimate Guide to Diagnostic Freeze Spray

Diagnosing and repairing electronics can be painstaking and sometimes frustrating work. Problems can be intermittent, with the faulty area on the PCB difficult to locate. Freeze spray is an essential tool, because it helps identify faulty components, solder joints, and other problems that can lead t...
Read This Post
You did not finish submitting your information to request a sample