Nothing Performs Like Chemtronics

Max-Kleen Citrus
Request a Sample

Your Sample Request

Max-Kleen Citrus Degreaser

*=required field

Max-Kleen Citrus Degreaser

Max-Kleen™ Citrus is ideal for removal of all types of soils including oxidized grease, sludge, wax, tar and oil. The moderate evaporation rate increases the cleaning power for hard-to-remove soils. The low surface tension provides for superior wetting to clean in even the tightest spots. Max-Kleen™ Citrus is registered with the NSF as a C1 cleaner for use in food processing facilities.

CLICK HERE FOR CLEANER DEGREASER SELECTION GUIDE

Features & Benefits

  • Citrus-based formula
  • Engineered for fast removal of oxidized grease, sludge, wax, tar and oil
  • Dielectric strength of 62 kV
  • Does not contain chlorinated solvents
  • Non-corrosive and nonconductive
  • Safe on most metals and plastics
  • NSF Registered — Nonfood Compounds/Code C1

Applications

  • Mechanical Parts Cleaning
  • Removal of tar and waxes from metal surfaces and parts
  • Automotive, aerospace, and general fabrication industries degreasing
  • Cleaning of hand tools and test probes
  • Ideal for use with a wipe
Shelf Life 5 yrs. unopened and 2 yrs. opened
Shipping Name Consumer Commodity ORM-D

FAQ's

Can you spray contact cleaner on a circuit board?

Most contact cleaners are safe to use on printed circuit boards (PCBs) in electronic devices. Make sure the contact cleaner solvent is compatible with all components, connectors, and packaging by testing on a scrap part or inconspicuous area.

How do you clean dirty electrical contacts?

Hold object to be cleaned in vertical position so the solvent and soil can run off. Spray 4 - 6 inches (10-15 cm) from surface. Wash from top to bottom, allowing the liquid to flush away contaminants. For precision application, use with extension tube. Allow solvent to fully evaporate and dry before...

How do you clean corroded contacts?

To improve the connection quality of an electrical contact or switch, you can remove oxidation or rust either mechanically and/or chemically. A brass or steel brush is the most common method of scrubbing off oxidation, although for sensitive contacts nylon is also used. With this method, take care t...

What is contact cleaner used for?

A contact cleaner (also called electrical cleaner, switch cleaner, electrical contact cleaner, and specific for automotive repair, battery terminal cleaner) is a solvent cleaner designed to remove contamination from electrical contacts, the conductive surfaces of connectors, switches and other elect...

Swipe to View Add to Cart Button 

Part # Size Units Per Case
ES2289

15 oz. / 425 g aerosol

12 cans
ES5589

53 gal / 200 L drum

1 drum
Order from an Authorized Distributor
You did not finish submitting your information to request a sample