Blog Heading

New Limited Quantity Symbol on Product Cartons

Through 2019, we will be changing the markings of some of our product cartons from “ORM-D” to the Limited Quantity symbol. This is to bring us up-to-date with the latest shipping requirements. ...
Read This Post

Try Our New Static Free Mat & Benchtop Reconditioner Wipes

Cleans and Rejuvenates ESD-Safe Surfaces Chemtronics Static Freeâ„¢ products are engineered to protect electronic equipment and workspaces from static buildup while cleaning and reconditioning. These products provide everything required for...
Read This Post

Evaluating Dielectric Properties To Identify Safe Contact Cleaners

You're getting intermittent issues with your device, so you suspect there's contamination in the electrical contacts. Dust, dirt, grease, and oxidation contamination can increase electrical resistance in contact areas. That means the current...
Read This Post

Why Flux Pens Make PCB Repair Easier

Flux is needed to prevent oxidation that tends to form when hot metals come in contact with the air. During printed circuit board repair and soldering, it's common to see liquid flux from the wave soldering equipment poured into jars and applied...
Read This Post

The Combination Cleaning Guide for Fiber Optic Connector Cleaning

There’s a dirty little secret in the fiber optics world. Many installers use cleaning methods that, when inspected under a scope, show a great deal of contamination left behind. Unless they inspect 100% of their connections, they take...
Read This Post

How to Select A Vapor Degreaser Solvent: Azeotrope vs. Azeotrope-Like

When deciding on the right vapor degreaser solvent to be used in your vapor degreasing process, there are quite a few factors involved. They include, just to name a few, performance, cost, compatibility with the existing unit, and exposure limits...
Read This Post

How To Evaluate The Best Silicone Conformal Coating

2021 was a rough year for PCB assemblers who use silicone conformal coating. Many EMS buyers of silicone conformal coating experienced shortages, with lead times going from days to weeks, then even to months. All the while, prices skyrocketed....
Read This Post

How Coventry Wipes Reduced Contamination in a Medical Device Manufacturing Process by 90%

Many times simple changes can yield huge results. And this case study is yet another example. Today, we'll review how we helped a catheter manufacturer reduce contamination in their manufacturing process by 90%. They achieved this result without...
Read This Post

How to Restore Flood Damaged Electronics, Telecom Equipment, and Fiber Optic Connectors

Although water can cause extensive damage to electronics, it does not mean that equipment is lost and cannot be replaced. Electronics, telecommunications equipment, and fiber optic connections are able to be restored after water damage. The...
Read This Post

Temporary Solder Mask Case Study: How Chemask Helped an EMS Company Realize an Extra 500k in Revenue

In this post, we’ll cover how a Washington based Electronics Manufacturing Services (EMS) company was able to open up their production capacity for a potential additional revenue of $520,000 per year. In addition, they were able to save...
Read This Post

FOCCUS CCT Clear Connection Tool

Easy to use tool for fast and effective end-face cleaning of fiber connectors

Electro-Wash QD Degreaser

Fast drying, nonflammable electronics cleaner degreaser
You did not finish submitting your information to request a sample